Apologies for taking so long to get to this second part!
This post will show you how I've used pieces from both kits (and a few extras) to make 22 cards from the October Pining for Plaid kit designed to make 10 cards.
Here are some examples of how the kit was designed to be assembled. They are really cute and easy shaker cards, and I enjoyed making them. But there were so many other ideas shared online I had to do more!
The best way to stretch the kit into more cards was to cut up many of the pre-printed plaid on one side, white on the other card bases. Most were simply cut in half and mounted onto Thick Whisper White card bases, but some were cut smaller or into other shapes and used in various ways.
These cards feature a number of elements that weren't in the kits, although all of the white circles are punched out of the shaker card layers and were intended to be discarded.
The pine trees on the two cards are cut with the Card Front Builder Thinlits Dies, and coordinate perfectly with the pre-printed (and somewhat larger) pine trees printed on panels in the kit - I love how Stampin' Up! thinks of details like this!
The bottom, center card's snowflake pennants are from the November Back in Plaid stocking kit. The card on the right actually uses the larger plaid from Merry Little Christmas Designer Series Paper along with a sprig of leaves from the November kit.
Can you figure out how I made Rudolf? The Lemon Punch! His ears are the leaves from that punch, and the antlers are 2 sprigs of leaves from the November kit, sponged with Soft Suede ink to darken them up.
The center card is a CASE of Rachel Tessman's bridge card. She "sacrificed" two of the pre-printed tree panels for her card (she must order many kits to use in creating), but I didn't want to use two of them this way, so I used those pine tree dies again, and cut Whisper White panels for the bridge and the back. The stamp set has snowflakes that match the pre-printed panel that Rachel used in the background, so I just stamped both panels randomly with them in Pool Party. The base is one of the kit's card bases with a portion cut off and additional score lines added. You can see all the details on Rachel's post here.
The right card uses more of the pennants from November's kit, along with the strip cut off for the bridge card.
This gate-fold card actually uses 1 ½ card bases...one is scored at 2 ⅛" on each side to make the gate (ignore the center score), and the other half is trimmed slightly on each long side to fit within the folds to make the inside of the card (and cover that center score line). I used one of the pre-printed pine tree panels and popped up another die cut pine tree on Dimensionals. Then I mounted it on a Basic Black square and adhered the left side only to the left gate panel. Fine tip glue worked well to add some of the kit's sequins for a bit of sparkle. Inside I stamped more snowflakes in Pool Party, the sentiment and glued another pine tree die cut flat.
The left card is another mash-up of both kits. The snowflake is a November kit pennant cut with a circle punch. The largest Cherry Cobbler circle is one of the shaker layer punch outs, colored with a Cherry Cobbler Stampin' Blend marker, though one could use the Cherry Cobbler Stampin' Spot in the October kit and smear the color right on.
The right card's holly leaves are a clever use of the sunburst stamp in the kit that I discovered in Kathie Zaban's video.
I love the look of the telescoping card! I wound up making 3 of these I liked it so much. Rachel Tessman gives directions on how to cut the squares on a paper cutter, but I "cheated" on my later ones and just nested two Layering Squares Framelits, held them together with washi tape, and ran the panels through my Big Shot. The outer square is adhered flat to the Basic Black square, then the middle one is mounted with one layer of Dimensionals, the middle with two layers. I glued 2 of the star sequins from the kit on top of the trees.
The right card simply mounts the gold foil trees punched out of pennant pieces from November's kit on a Basic Black panel along with a sentiment and gold foil mat from the October kit.
Another CASE from Rachel Tessman...this is a Note Card stamped with the pine tree stamp from October's kit multiple times in Memento Tuxedo Black ink and once in Old Olive ink along with the sentiment from November's kit. I colored rhinestones and pearls with a variety of Stampin' Blends and stuck them randomly on the Old Olive tree.
I still had a number of shaker card pieces remaining, so I used some of the Merry Little Christmas DSP in place of the kit's card bases to make a few more shaker cards. This shows you all of the 22 card designs I made with this kit. Here are a few non-card projects:
One card base was used to make these little treat holders...I scored ½" on either side of the existing center score line to accommodate the Hershey's Nuggets, then sliced the base into (3) 1.5" strips and folded on my score lines. I adhered 3 Nuggets together with Glue Dots, then to the bottom of the holder. I cut 3 more of the November kit pennants - making squares with the gold foil trees and mounting them on slightly larger Cherry Cobbler squares. The remaining portion of the white pennants were stamped with the To/From stamp and adhered to the back. A length of Cherry Cobbler baker's twine from the kit was wrapped around 3 of the kit's clothespins and used to keep the holders closed at the top.
Finally, I made this ornament by nesting some Layering Circle Framelits and cutting the plaid frame from a scrap of card base. I also cut a Whisper White circle and stamped snowflakes and a sentiment on it, and cut one of the kit's acetate pieces to match. I used one of the shaker card foam circles to assemble. A smaller circle of plaid is adhered to the back to hide where the Old Olive ⅛" Sheer Ribbon is attached. A Gold ⅛" Ribbon bow finishes it off.
Whew! It was a fun, creative challenge to see how many different projects I could make from these 2 kits. I encourage you to see my inspiration on my Paper Pumpkin Pinterest Board. There are a lot more ideas pinned there...and I have just a few things left over in my kits that may let me try some!
I've been paper-crafting since 2006, and an Independent Stampin' Up! demonstrator since 2010. I love sharing my craft with others, either through classes or by creating special cards and gifts that meet their needs. Join me in creating fun!